File:BatBox ig.png

The BatBox is the most basic of several energy storage devices. It is able to store up to 40,000 EU and can accept currents of up to 32 EU/t from any of its 5 input faces (but no more than 32 EU/t in total; if one face is accepting 32 EU/t, other input faces cannot take any power). It can also emit a current of up to 32 EU/t from its output face.

Like all storage units its output face is marked by a special texture, a small orange dot, which usually faces the player when the block is placed. The direction of the output face can be changed by right-clicking with a Wrench onto any of the input faces of the block; normally, this will point the output face towards the player, but holding Shift while clicking will point the output face in the opposite direction. Be aware that right-clicking the BatBox while pointing at its output face will dismantle it.

Applying a Redstone signal to the BatBox will make it stop emitting power from the output face.

The BatBox can charge most energy storage devices. It is also very useful to implement BatBoxes to store power from generators and also as a method of extending the reach of your cable. A typical starter setup of Industrial devices involves a natural generator (such as a wind or solar array for free energy) feeding into a BatBox with a row of copper cable along the front of the BatBox which feeds the back of your Macerator, Electric Furnace, etc (in essence, a T-shaped network). Note that the BatBox resets the cable length energy loss calculations, so they work well to extend your power network; using up to four insulated copper cable segements from the generator to the BatBox and up to four segments away from your BatBox to all your devices without losing any energy. Likewise, they can very easily be daisy chained to extend your storage capabilities.

The BatBox is a Tier 1 energy storage device. Simpler to craft, but otherwise inferior to the MFE Unit (Tier 2) and the MFS Unit (Tier 3).

Video Tutorial

http://www.youtube.com/user/FMBsChannel?feature=mhee

Recipe

A BatBox is made from 5 Wooden Planks, 3 RE Batteries, and 1 Insulated Copper Cable. Uncharged RE Batteries work just as well as charged ones.

(Raw) Materials Needed:

•5 Wooden Planks

•4 Rubber

•3 Copper Ingots (you will have 2 uninsulated copper wire left)

•12 Tin Ingots

•6 Redstone

Materials Needed:

•5 Wooden Planks

•1 Insulated Copper Cable

•3 RE Batteries

Usage

Electric Jetpack

Start a Discussion Discussions about BatBox

• 

  batbox or any other buildcraft energy source

  2 messages
  • 
    A Wikia contributor
    could someone tell me if it is posible to stop the eu flow? a lever or something with redstone? 2013-05-07T08:29:20Z
  • 
    Watson 777
    EU-Splitter Cable ;) 2013-05-07T11:01:05Z
• 

  Problems with Bat box?

  11 messages
  • 
    A Wikia contributor
    I placed my bat box down and I can't find input. It with the new texture pack so I can't do anything about charging it. Please help 2013-04-12T23:51:27Z
  • 
    SeaWing
    The batbox has one output side and five input sides. The output side is the one that faces you when you place it down. 2013-04-13T01:16:09Z

See more discussions >